Progressive International Electronics C2000 - Manual (Page 39)

C2000 Installation
‚ 33
Gilbarco Electronic Fuel Pumps
Read entire installation section before attempting to install system.
Take careful note of warnings in this section before mounting C2000.
Mount the C2000's configurator box on the wall or under the counter so
that no cables are strained.
1. Install the Gilbarco pumps according to the Gilbarco installation
instructions. Connect the pump data wires to the Gilbardo "D"
box according to Gilbarco installation instructions.
2. Locate the appropriate pump connection cable. Connect the DIN
or D-sub connector to the Gilbarco "D" box. The various "D"
box models are illustrated in Figures 4, 5 and 6.
Figure 4: Gilbarco PAO1330000 "D" Box