2 performance specifications, 2 performance specifications -4 – Proface AGP3500 - 10.4 DIO HMI" User Manual

Page 35

Advertising
background image

ST3000 Series Hardware Manual

3-4

3.1.2

Performance Specifications

„ Performance Specifications

AST-3201A

AST-3211A

Application

*1

*1.

User active capacity.

FLASH EPROM 6MB

Data Backup

SRAM 320KB

Used lithium battery for backup memory

Interf

ace

Serial
Interface

COM1: RS-232C
Asynchronous Transmission
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data Transmission Speed:

2400 bps to 115.2 kbps
Connector: D-Sub 9pin plug

COM1: RS-232C
Asynchronous Transmission
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data Transmission Speed:

2400 bps to 115.2 kbps
Connector: D-Sub 9pin plug

COM2: RS-422/RS-485

*2

Asynchronous Transmission
Data Length: 7 bit/8 bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data Transmission Speed:

2400 bps to 115.2 kbps (RS-422/RS-485)
187.5 kbps (MPI)
Connector: D-Sub 9pin plug

*2.

RS-485 is compliant with AST-3201A units with revision code "C" or later.

About Revision (page 12)

COM2: RS-485 (MPI only)
Asynchronous Transmission
Data Length: 7bit/8bit
Parity: none, Odd or Even
Stop Bit: 1bit/2bit
Data Transmission Speed:

187.5 kbps (MPI)

Connector: D-Sub 9pin socket

USB Host
Interface

USB 1.1 compliant. (TYPE-A conn.) x 1
Power Supply Voltage: DC5V

±

5%

Output Current: 500mA (Max.)
Communication Distance: 5m (Max.)

Clock
Accuracy

*3

*3.

The ST’s internal clock has a slight error. At normal operating temperatures and conditions,

with the ST operating from its lithium battery, the degree of error is 65 seconds per month.

Variations in operating conditions and battery life can cause this error to vary from -380 to +90

seconds per month. For systems where this degree of error will be a problem, the user should

be sure to monitor this error and make adjustments when required.

±

65 seconds/ month (at room temperature)

When the message “RAAA051 Low battery” is displayed, supply power to the display

unit and fully charge the battery. The battery charges within 24 hours to a level which

allows backup operation. Completing a full charge requires about 96 hours (4 days).

A Lithium battery’s lifetime is: 10 years when the battery’s ambient temperature is 40°C

or less. 4.1 years when the battery’s ambient temperature is 50°C or less. 1.5 years when

the battery’s ambient temperature is 60°C or less.

When used for backup:

Approximately 100 days, with a fully charged battery.

Approximately 6 days, with a half-charged battery.

SEE

Advertising