When using the dc type – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 88
Chapter 4 Installation and Wiring
4-9
When using the DC Type
Power Cord Specifications
Power Connector (Plug) Specifications
When using the ST-3200/3300/3400 Series
When using the ST-3500 Series
Power Cord Diameter
0.75 to 2.5mm
2
(18-12AWG)
Conductor Type
Solid or Twisted Wire
Conductor Length
• Use copper conductors only.
• If the Conductor’s end (individual) wires are not twisted correctly, the end wires
may either short against each other, or against an electrode.
+
24V
-
0V
FG
FG Grounding Terminal connected to the
ST
•
The power supply connector (plug) is CA5-DCCNM-01 (made by Pro-face) or
MSTB2,5/3-ST-5,08 (made by Phoenix Contact
*1
).
*1.
For details, please contact your local Phoenix Contact distributor.
+
24V
-
0V
FG
FG Grounding Terminal connected to the
ST
•
The power supply connector (plug) is CA5-DCCNL-01 (made by Pro-face) or
GMVSTBW2, 5/3-STF-7, 62 (made by Phoenix Contact
*1
).
*1.
For details, please contact your local Phoenix Contact distributor.
7mm[0.28in]
Insertion
Direction
+
−
FG
Power Cord Insertion Holes
FG
+
−