Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 7)

6
LCD Panel Usage Precautions
• The LCD panel’s liquid contains an irritant. If the panel is damaged and any of this liquid contacts your skin, immedi-
ately rinse the area with running water for at least 15 minutes. If the liquid gets in your eyes, immediately rinse your
eyes with running water for at least 15 minutes and consult a doctor.
• The ST unit’s LCD screen may flicker or show unevenness in the brightness of certain images or at some contrast set-
tings. This is an LCD characteristic and not a product defect.
• There’s an individual difference in brightness and tone of LCD screen. Please be aware of this difference before using
the lined-up plural units.
• Depending on the ambient temperature, LCD screens may sometimes look whitish (at high temperatures) or blackish
(at low temperatures). This is an LCD characteristic and not a product defect.
• Some of ST unit's LCD screens may contain light or dark pixels. This is an LCD characteristic and not a product
defect.
• Extended shadows, or “Crosstalk” may appear on the sides of screen images. This is an LCD characteristic and not a
product defect.
• The color displayed on the ST unit’s LCD screen may appear different when seen from outside the specified viewing
angle. This is an LCD characteristic and not a product defect.
• When the same image is displayed on the ST unit’s screen for a long period, an afterimage may appear when the image
is changed. This is an LCD characteristic and not a product defect.
• To prevent an afterimage:
* Set the ST unit’s display OFF feature when you plan to display the same screen image for a long period of time.
* Change the screen image periodically and try to not display the same image for a long period of time.