Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 83
Advertising
ST3000 Series Hardware Manual
4-4
•
When installing the ST in a slanted panel, the panel face should not incline more than 30°.
•
When installing the ST in a slanted panel, and the panel face inclines more than 30°, the ambient
temperature must not exceed 40°C. You may need to use forced air cooling (fan, A/C) to ensure the
ambient operating temperature is 40°C or below.
•
When installing the ST vertically, position the unit so that the Power Input Terminal Block is also vertical.
30° or less
Advertising
This manual is related to the following products: