Cable attached dimensions – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 77
Advertising
ST3000 Series Hardware Manual
3-46
Cable Attached Dimensions
Unit:mm[in.]
• All the above values are designed in case of cable bending. The dimensions
given here are representative values depending on the type of connection cable
used. Therefore, they are all intended for reference only.
30
[1.18
]
Power Connector
Bottom
Rear
40 [1.
57]
Left side
Right side
8.4[0.33]
The DC type unit has the
power supply terminals
shown above.
30[1.18]
Advertising
This manual is related to the following products: