Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 82)

Chapter 4 Installation and Wiring
4-3
„ Installation Requirement
• For easier maintenance, operation, and improved ventilation, be sure to install the ST at least 100 mm
[3.94 in.] away from adjacent structures and other equipment.
• Be sure that the ambient operation temperature and the ambient humidity are within their designated
ranges. (Ambient operation temperature: 0 to 50°C, Ambient humidity: 10 to 90%RH, Wet bulb
temperature: 39°C max.) When installing the ST on the panel of a cabinet or enclosure, “Ambient
operation temperature” indicates both the panel face and cabinet or enclosure’s internal temperature.
• Be sure that heat from surrounding equipment does not cause the ST to exceed its standard operating
temperature.
Unit: mm[im.]
100
[3.94]
100
[3.94]
100
[3.94]
100
[3.94] 100
[3.94]
100
[3.94]
100
[3.94]
Panel
Face
Cabinet
interior