3 when using the st-3500 series, 3 when using the st-3500 series -19 – Proface AGP3500 - 10.4 DIO HMI" User Manual

Page 98

Advertising
background image

Chapter 4 Installation and Wiring

4-19

4.4.3

When using the ST-3500 series

„ Attachment

(1)

Insert the USB holder into the slot in front of the ST unit’s USB port and pull it down and forward.

(2)

Pass the band of the USB cable clamp through the bridge of the USB holder.

(3)

Insert the USB cable into the port. Fasten the band around the plug and secure it with the clamp.

1

2

USB Holder

Bridge

Clamp

USB Cable

USB Holder

Advertising
This manual is related to the following products:

AGP3400 - 7.5 DIO HMI", AGP3300 - 5.7 DIO HMI", AGP3600 - 12.1 FLEX Network HMIs", AGP3500 - 10.4 FLEX Network HMI", AGP3400 - 7.5 FLEX Network HMI", AGP3600 - 12.1 CANopen HMI", AGP3500 - 10.4 CANopen HMI", AGP3400 - 7.5 CANOpen HMI", AGP3300 - 5.7 CANopen HMI", AGP3300H - 5.7 Handheld HMIs", AGP3750 - 15 Multi-Media HMI", AGP3650 - 12.1 Multi-Media HMIs", AGP3550 - 10.4 Multi-Media HMIs", AGP3450 - 7.5 Multi-Media HMI", AGP3360 - 5.7 Multi-Media HMI", AST3300 - 5.7 Basic HMI", AST3200 - 3.8 Basic HMI", AGP3600 - 12.1 Standard HMIs", AGP3500 - 10.4 Standard HMIs", AGP3400 - 7.5 Standard HMI", AGP3300 - 5.7 Standard HMI", AGP3200 - 3.8 Standard HMI"

Popular Brands
Popular manuals