Yokogawa DAQWORX - Manual (Page 118)

4-17 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Using Historical V
iewer
4.4 Using the Cursors
On the graph viewer, the measured data values at the position specified with the cursor
can be displayed.
There are two types of cursors, cursor A and cursor B. The measured data values at
cursors A and B and the results of statistical computations between the two cursor points
can be displayed.
Displaying the Cursors and Reading the Values at the Cursors
Procedure
1. In the waveform display area of the graph viewer, point the position at which to read
the measured data values and drag to the next position. The first position is cursor A,
and the position dragged to is cursor B.
Cursor A Cursor B
2. Click the “Control” button on the toolbar.
Control button
The “Control” dialog box appears showing the date and time of measurement and
the measured values at the cursor positions.
To precisely adjust the cursor position, click the “cursor adjustment” button on the
right of the data number. The cursor moves by one data point at each click.
Changes to cursor movements in either one of the graph viewer or sheet viewer
windows or the “Control” dialog box window will also change the cursor positions and
display values in the other windows.