Yokogawa DAQWORX - Manual (Page 76)

2-56 IM WX101-01E
Pausing/Terminating the Monitor Server
Procedure
1. To pause or resume the Monitor Server, perform the following procedure.
In the “DAQLOGGER Monitor Server” window, select “Pause” from the “Monitor
Server” menu. The data updating on the remote monitor side is paused.
To resume the Monitor Server, select “Monitor Server” and then “Resume” in the
menu bar of the “DAQLOGGER Monitor Server” window. The data updating on the
remote monitor side is resumed.
2. To terminate the Monitor Server, perform the following procedure.
From the menu bar of the “DAQLOGGER Monitor Server” window, select “Monitor
Server” and then “Exit” or click the “Close” button at the upper right corner of the
window. The communication with the remote monitor is disconnected.
Preparing the Remote Monitor
See chapter 8.
2.12 Setting Up the Monitor Server