Yokogawa DAQWORX - Manual (Page 371)

7-195 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Display Update Interval
Select the display update interval when the operation display mode is set to Auto. Select 2,
3, 4, or 5 seconds.
Indication for Display
Select whether to have Channel Number or Tag indication on the DC100/DR display.
Note that the channel number will be printed/displayed regardless of selection, if no Tag
setting is made (or all spaces).
Subunit and Module Configuration
It is possible to attach or remove subunits and modules, or to change module types using
DAQLOGGER Hardware configurator.
Procedure
1. Open the setting window of the DARWIN of which the
module configuration is to
be changed, and select “Module Configuration” from the “System” menu of the
“DAQLOGGER Hardware Configurator” window. The “Module Configuration” dialog
box opens.
Adding and removing subunits
2. To add a subunit click an empty subunit placing area and click “OK” when asked “Add
Unit?.”
3. To remove a unit click right side of the module (reading DS600/DS400) and click “OK”
when asked “Delete Unit?.”
7.9 Setting DARWIN