Yokogawa DAQWORX - Manual (Page 72)

2-52 IM WX101-01E
2.11 Setting Up the DDE Server
Using the DDE server permits data and time that are scanned and recorded by the
logging software to be loaded into client applications, such as EXCEL. For detailed
information about DDE, refer to a book that is commercially sold.
Starting the DDE Server
Procedure
1. Click “DDE” in the “DAQLOGGER Manager” window.
The DDE Server starts and the “DAQLOGGER DDE” window appears.
If you start the scanning or recording operation in this condition, the updating of
the topic data that are displayed on the “DAQLOGGER DDE” window starts (If the
scanning or recording operation is already started, the data updating starts when the
“DAQLOGGER DDE” window appears).
The number of data points displayed in topic “data” is the maximum number of
channels (1600, 1000, or 400).
Setting Up the DDE Server
Perform the following procedure when you need to change the configuration.
Procedure
1. In the menu bar of the “DAQLOGGER DDE” window, select “DDE Server” and then
“Set Application Name.”
The “Set Application Name” dialog box opens.
Type the application name and click “OK.”
The default application name is “MLDdeSrvr.”
2. In the menu bar of the “DAQLOGGER DDE” window, select “DDE Server” and then
“Update Mode.”