Yokogawa DAQWORX - Manual (Page 24)

2-4 IM WX101-01E
Note
• Use the recorder disconnect function such as when replacing the chart paper of the
recorder.
• Do not change the input range of channels after disconnecting the recorder. If you change
the input range of a channel, the channel is processed as if it is turned OFF when the
recorder is reconnected.
• The recorders that have been disconnected using the above procedure cannot be
automatically reconnected. For details on the auto reconnect function, see section 2.9.
Terminating DAQLOGGER
Procedure
1. From the menu bar of “DAQLOGGER Manager,” select “File” and then “Exit” or click
the “Close” button at the upper right corner of the window.
Note
Exit all DAQLOGGER programs before terminating Software Manager.
2.3 Starting DAQLOGGER