Yokogawa DAQWORX User Manual
Page 474
9-4
IM WX101-01E
Warning
Code
Warning message
What to do
W3431
Memory may be initialized. Continue sending data?
If necessary, save the data in the data memory onto a
medium before sending data.
W3433
This file does not fit settings made with DAQLOGGER
Software Configurator. Continue?
Use the Software Configurator to check the model
information set.
W3434
This setting is initialized. OK?
— — — —
W3435
System configuration is changed. Setting is initialized.
OK?
— — — —
W3436
Hardware and software configurations don't match.
Continue to send?
— — — —
W3437
Hardware model doesn't match software setting.
Continue sending?
— — — —
W3438
Hardware and Software configurations don't match.
Continue sending data?
— — — —
W3439
Style numbers don't match. Continue sending?
— — — —
W3440
Hardware and Software options don't match.
Continue sending?
— — — —
W3441
This is a reference channel. Channels referring to this
channel will be changed too!
— — — —
W3442
Settings of other power module channels will be changed
too!
— — — —
W3443
Some data couldn't be read.
— — — —
W3444
Some existing data were changed.
— — — —
W3445
Writing operation was changed.
— — — —
W3446
Some channels out of the copy range will be changed
too!
W3447
The digital print settings of some measurement and math
channels have been changed.
— — — —
W3448
The relay settings of some measurement and math
channels were set OFF.
— — — —
W3449
Some Event/Action settings have been changed.
— — — —
W3450
Following the change of temperature unit, SET (Regular)
settings have been initialized.
— — — —
W3451
This file does not fit system settings made with
DAQLOGGER Software Configurator. Continue?
— — — —
W3452
Contains invalid data. Open this setting?
— — — —
W3453
All program pattern configuration will be initialized.
Continue?
— — — —
W3454
This pattern configuration will be initialized.Conutinue?
— — — —
Message
Code
Message
What to do
M3461
Some channels could not be copied.
— — — —
M3462
Communication was successful.
— — — —
M3463
Communication was cancelled.
— — — —
M3464
Communication was aborted.
— — — —
M3465
Continue to send?
— — — —
M3467
Add Unit?
— — — —
M3468
Delete Unit?
— — — —
M3469
Initial balancing failed.
— — — —
9.1 Error Messages and Their Corrective Actions