Yokogawa DAQWORX User Manual
Page 397
7-221
IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
DO Num
Set the DO that is to perform DIO monitor. If the DIO Kind is set to DO-2, DIO12, DO2P,
or DIO-12P, set a separate DO for ON and OFF. The DO numbers cannot overlap
including those of other DIO entry numbers.
This does not appear when DIO Kind is DI-1.
DI Num
Set the DI number to be monitored.
Tag
Set the tag.
Enter up to eight alphanumeric characters.
TagComment
Set the tag comment.
Enter up to eight alphanumeric characters.
Operation Status Display
Set the label and color for displaying the status.
DIO Label (CX Style Number S3 or Later)
Set the DIO label.
Logic math (CX Style Number S3 or Later)
KIND
Set the output destination of the computed result.
Expression
Enter the expression. Click the [Expression Operator] button to display the possible
operators.
Constant
Set constants to be used in the expression.
The constants are common with the constants of PV/SP math and retransmission.
7.10 Setting CX Series