ADTRAN 1000R Series - Manual (Page 1132)

Command Reference Guide Tunnel Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1132
dynamic-dns [dyndns | dyndns-custom | dyndns-static] <hostname>
<username> <password>
Use the dynamic-dns command to configure Dynamic DNS service provided by Dynamic Network
Services, Inc. (www.dyndns.org).
Syntax Description
Refer to Functional Notes below for argument descriptions.
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 8.1 Command was introduced.
Release 9.1 Command was expanded to include tunnel interfaces.
Functional Notes
dyndns - The Dynamic DNS SM service allows you to alias a dynamic IP address to a static hostname in
various domains. This allows your unit to be more easily accessed from various locations on the Internet.
This service is provided for up to five hostnames.
dyndns-custom - DynDNS.org's Custom DNS SM service provides a full DNS solution, giving you complete
control over an entire domain name. A web-based interface provides two levels of control over your
domain, catering to average or advanced users. Five globally redundant DNS servers ensure that your
domain will always resolve.
A choice of two interfaces is available. The basic interface is designed for most users. It comes
preconfigured for the most common configuration and allows for easy creation of most common record
types. The advanced interface is designed for system administrators with a solid DNS background, and
provides layout and functionality similar to a BIND zone file allowing for the creation of nearly any record
type.
Custom DNS SM can be used with both static and dynamic IPs and has the same automatic update
capability through Custom DNS-aware clients as Dynamic DNS.