ADTRAN 1000R Series - Manual (Page 177)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 177
show demand
Use the show demand command to display information regarding demand routing parameters and
statistics.
Variations of this command include the following:
show demand
show demand interface
show demand interface <interface>
show demand resource pool
show demand resource pool <resource pool name>
show demand sessions
Syntax Description
interface Displays the information for all demand routing interfaces.
interface <interface> Displays information for a specific demand routing interface. Valid
range: 1 to 1024. Type show demand interface ? for a list of valid
interfaces.
resource pool Displays all resource pool information.
resource pool <resource pool name> Displays resource pool information for a specific resource pool
name.
sessions Displays active demand sessions.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following is example output from the show demand interface command:
>enable
#show demand int 1
Demand 1 is UP (connected)
Configuration: