ADTRAN 1000R Series - Manual (Page 189)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 189
show frame-relay multilink <interface> detailed
Use the show frame-relay multilink command to display information associated with the Frame Relay
multilink interface.
Syntax Description
<interface> Optional. Specifies the display of information for a specific interface. Enter the
show frame-relay multilink ? command for a complete list of interfaces.
detailed Optional. Displays more detailed information.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following is a sample output from this command:
>enable
#show frame-relay multilink
Bundle: frame-relay 1 is DOWN; class A bundle
Near-end BID: MFR1; Far-end BID: unknown