ADTRAN 1000R Series - Manual (Page 1231)

Command Reference Guide Crypto Map IKE Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1231
antireplay
Use the antireplay command to enable antireplay sequence number checking for all security associations
created on this crypto map. Use the no form of this command to disable.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series and units.
Command History
Release 7.1 Command was introduced.
Usage Examples
The following example enables antireplay sequence checking on crypto map VPN 100:
(config)#crypto map VPN 100 ipsec-ike
(config-crypto-map)#antireplay