Ip ospf authentication [message-digest | null – ADTRAN 1000R Series User Manual
Page 1203
Command Reference Guide
VLAN Interface Config Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1203
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest
Optional. Selects message-digest authentication type.
null
Optional. Specifies that no authentication is used.
Default Values
By default, this is set to null (meaning no authentication is used).
Applicable Platforms
This command applies to the NetVanta 300, 1000R, and 2000 Series units.
Command History
Release 3.1
Command was introduced.
Usage Examples
The following example specifies that no authentication will be used on the VLAN interface:
(config)#interface vlan 1
(config-interface-vlan 1)#ip ospf authentication null