ADTRAN 1000R Series User Manual
Page 461
Command Reference Guide
Global Configuration Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
461
logging email address-list <email address> ; <email address>
Use the logging email address-list command to specify one or more email addresses that will receive
notification when an event matching the criteria configured using the logging email priority-level
command is logged by the AOS. Refer to logging email priority-level [error | fatal | info | notice |
warning]
for more information. Use the no form of this command to remove a listed address.
Syntax Description
<email address>
Specifies the complete email address to use when sending logged messages.
(This field allows up to 256 characters.)
Enter as many email addresses as desired, placing a semi-colon (;) between
addresses.
Default Values
By default, there are no configured logging email addresses.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example specifies three email addresses to use when sending logged messages:
(config)#logging email address-list
[email protected];[email protected];[email protected]