ADTRAN 1000R Series - Manual (Page 261)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 261
show modules [verbose]
The show modules command displays information on the current system setup.
Syntax Description
verbose Enables detailed messaging.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, and 5000 Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example displays the modules installed in the unit.
>enable
#show modules
Slot Ports Type Serial # Part # H/W Rev
0 3 Netvanta 5305 *********** 1200990L1 A
1 1 T3 Module *********** 1200832L1 A
2 - Empty ----------- ----------- ----------
3 - Empty ----------- ----------- ----------
4 - Empty ----------- ----------- ----------
5 - Empty ----------- ----------- ----------
6 - Empty ----------- ----------- ----------
7 - Empty ----------- ----------- ----------