ADTRAN 1000R Series - Manual (Page 182)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 182
show dialin interfaces
Use the show dialin interfaces command to display information regarding remote console dialin.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 4.1 Command was introduced.
Usage Examples
The following is sample output from the show dialin interfaces command:
>enable
#show dialin interfaces
Dialin interfaces...
modem 1/3 dialin interface:
Connection Status: Connected
Caller ID info: name-John Smith number-5551212 time-14:23:10 2/17/2003