Agilent Technologies 16700 - Manual (Page 39)

39
Post-Processing and Analysis Tool Sets
Software Tool Sets
Once the data is acquired, you can
rely on the post-processing tools to
rapidly consolidate data into displays
that provide insight into your sys-
tem's behavior. The tool sets
described in the following pages are
optional, post-processing software
packages for the 16700 Series logic
analysis systems. Selecting the Right Tool Set
Take a look at the tool set descrip-
tions below to see if they meet your
needs. If you don't immediately see
what you need there is also the
option of writing your own analysis
application using the tool develop-
ment kit. Best of all, you can try out
any one of these tool sets with no
obligation to buy.
Application Product Name Model Number Detailed Information
Debug your real-time code at the source level Source Correlation B4620B Page 40
Correlate a logic analyzer trace with the high-level source Tool Set
code that produced it. Set up the logic analyzer trace by
simply pointing and clicking on a line of source code.
Debug your parallel data communication buses Data Communications B4640B Page 44
Display logic analyzer trace information at a protocol level. Tool Set
Powerful trigger macros allow triggering on standard or
custom protocol fields. Data bus width is limited only by
the number of available channels.
Optimize your target system's performance System Performance B4600B Page 53
Profile your target system's performance to identify system Analysis Tool Set
bottlenecks and to identify areas needing optimization.
Solve your serial communication problems Serial Analysis B4601B Page 60
Convert serial bit streams to parallel format for easy viewing Tool Set
and analysis. Supports serial data with or without an external
clock reference and protocols that use bit stuffing to maintain
clock synchronization. Works at speeds up to 1 GHz.
Customize your trace for greater insight Tool Development B4605B Page 66
Create custom tools using the C programming language. Kit
Custom tools can analyze captured data and present it in
a form that makes sense to you. Analysis systems do not
require the tool development kit to run generated tools.