Agilent Technologies 16700 - Manual (Page 93)

93
State/Timing Modules Specifications and
Characteristics
Agilent Technologies 16715A, 16716A, 16717A, 16740A, 16741A, 16742A,
16750A, 16751A, 16752A Supplemental Specifications* and Characteristics (continued)
State Mode 16715A, 16716A, 16717A 16750A, 16751A, 16752A
167 Mb/s State Mode 400 Mb/s State Mode
Trigger resources 8 Patterns evaluated as =, ≠, >, <, ≥, ≤ 8 Patterns evaluated as =, ≠, >, <, ≥, ≤
4 Ranges evaluated as in range, not in range 4 Ranges evaluated as in range, not in range
2 Occurrence counters 2 Occurrence counters
4 Flags 4 Flags
Trigger resource conditions Arbitrary Boolean combinations Arbitrary Boolean combinations
Trigger actions Goto Goto
Trigger and fill memory Trigger and fill memory
Store qualification Default Default
Maximum occurrence counter 16,777,215 16,777,215
Maximum pattern/range width 32 bits 32 bits
Data in to trigger out (BNC port) 150 ns, typical 150 ns, typical
Flag set/reset to evaluation 110 ns, typical 110 ns, typical
Timing Mode 16715A, 16716A, 16717A 16740A, 16741A, 16742A, 16750A, 16751A, 16752A
Timing analysis sample rate 667/333 MHz 800/400 MHz
(half/full channel)
Channel count 68 per module 68 per module
Maximum channels on 340 340
a single time base and trigger
Number of independent analyzers 2, can be setup in state or timing modes 2, can be setup in state or timing modes
Sample period (full channel) 3 ns to 1 ms 2.5 ns to 1 ms
Sample period (half channel) 1.5 ns 1.25 ns
Minimum data pulse width
for data capture
Conventional timing 1.75 ns 1.5 ns
Transitional timing 3.9 ns 3.8 ns
For trigger sequencing 6.1 ns 5.1 ns
Sample period accuracy ±(100 ps + .01% of sample period) ±(100 ps + .01% of sample period)
Channel-to-channel skew < 1.5 ns < 1.5 ns
Time interval accuracy ± (sample period + channel-to-channel ± (sample period + channel-to-channel
skew + .01% of time interval reading) skew + .01% of time interval reading)
Minimum detectable glitch 1.5 ns 1.5 ns
Memory depth (half/full channel) 16716A: 1M/512K 16750A: 8/4M
16715A, 16717A: 4/2M 16751A: 32/16M
16752A: 64/32M
* All specifications noted by an asterisk are the performance standards against which the product is tested.