Agilent Technologies 16700 - Manual (Page 47)

47
Post-Processing and Analysis Tool Sets
Data Communications
Product Characteristics Additional Information
Requires 16700 Series logic analysis system with
system software version A.01.50.00 or higher
Applications Trigger on a processor event and see what
is happening on a parallel data bus with
protocol information or vice versa.
Supported Measurement Modules 16715A, 16716A, 16717A, 16718A, 16719A,
16750A, 16751A, 16752A
Protocols Supported • Ethernet • Example files for these protocols are provided with the
• ATM product. These standard files can be edited to include
• TCP/IP Stack any custom protocol "wrapper" layers or fields.
• Custom • Custom protocols are supported by entering the protocol
setup information via the logic analyzer interface or a text
file. Custom protocol definitions are used in both the
trigger definition and packet display.
Trigger Macro All custom-defined protocol fields or layers
are supported in the trigger macro
Maximum Parallel Bus Width Limited only by the number of available channels
Display Features • Color • Each protocol layer is displayed with a different color in
the analyzer’s lister display to allow easy viewing of
protocol data.
• Filters and preferences • Specific protocol layers and fields can be selected for
viewing in the trace. Provides many different views of the
data. Allows you to concentrate on the data of interest
for a particular measurement.
• Payload information • Included after the header in a raw hex format
• Protocol layers • Can be collapsed or expanded to create a custom view of
the acquired data