Edwards Signaling EBPS Remote Booster Power Supply - Manual (Page 7)

Remote Booster Power Supply Technical Reference Manual 1
Introduction
This installation manual is intended for use by installers and field technicians. It
provides the installation procedures, wiring diagrams, DIP switch settings, etc.
required to install and set up the Remote Booster Power Supply (BPS).
Models covered
The following table lists the booster power supply models that are covered in this
manual.
Catalog number Description
BPS6A 6.5 A booster power supply
BPS6A/230 6.5 A booster power supply
BPS6AC 6.5 A booster power supply
MIRBPS6A 6.5 A booster power supply
MIRBPS6A/230 6.5 A booster power supply
XLS-BPS6A 6.5 A booster power supply
XLS-BPS6A/230 6.5 A booster power supply
EBPS6A 6.5 A booster power supply
EBPS6A/230 6.5 A booster power supply
BPS10A 10 A booster power supply
BPS10A/230 10 A booster power supply
BPS10AC 10 A booster power supply
MIRBPS10A 10 A booster power supply
MIRBPS10A/230 10 A booster power supply
XLS-BPS10A 10 A booster power supply
XLS-BPS10A/230 10 A booster power supply
EBPS10A 10 A booster power supply
EBPS10A/230 10 A booster power supply
Compatibility
The input circuits of the booster power supply can be connected to 12 VDC or
24 VDC systems.
For details about device compatibility, refer to the Remote Booster Power Supply
Compatibility List
(P/N 3100656).