KYORITSU 3128 - Manual (Page 26)

22
KEW3128
6. Measurement KEW3128
How to select a Measurement Mode
A long press (1 sec or more) of the ESC Key displays the Mode Selection
Screen.
Measurement modes which are selectable on the Model Selection Screen
are mentioned at “Insulation Diagnosis test” (=>P.47).
Move the cursor with the UP/ DOWN Key
or Shuttle Switch, and confirm the mode
with the ENTER Key.
Then a process from making settings to a
start of measurement is displayed at the
bottom of the LCD. Measurement Modes
can be switched directly from the Menu.
(=>P.37 Menu)