Danger, Warnig – KYORITSU 3128 User Manual

Page 9

Advertising
background image

KEW3128

5

KEW3128

1. Safety Warnings

#

DANGER

Put a pair of insulated gloves and use this instrument.

Never make measurement on a circuit in which the electrical potential

exceeds AC/DC600V.

Do not attempt to make measurement in the presence of flammable

gasses. Otherwise, the use of the instrument may cause sparking, which
can lead to an explosion.

Never attempt to use the instrument if its surface or your hand are wet.

Be careful not to short-circuit the power line with the metal part of the test

leads when measuring voltage. It may cause personal injury.

Do not exceed the maximum allowable input of any measuring range.

Do not press the Test Button with test leads connected to the instrument.

Never open the Battery Compartment Cover while making measurement.

Do not touch the circuit under test when measuring insulation resistance or

right after a measurement. You may get an electric shock by a test voltage.

Stop a measurement if contamination or carbonization which may impair

insulation characteristics is found on the test leads or around the terminals.

Do not repeat short-circuiting/ opening of test leads intentionally during

insulation resistance measurements. Otherwise, measurements may be

ceased or LCD may become blank due to a malfunction of the instrument.

Aerial discharges occur at the tips of test leads when short-circuiting and
opening the test leads; excessive discharges may impair the performance
of the instrument.

#

WARNIG

Never attempt to make any measurement if any abnormal conditions are

noted, such as broken case and exposed metal parts.

Do not rotate the Range Switch with the test leads connected to the equipment

under test.

Do not install substitute parts or make any modification to the instrument. Return

the instrument to Kyoritsu or your distributor for repair or re-calibration.

Do not try to replace battery if the surface of the instrument is wet.

Be sure to insert the plug into the terminal firmly when using test leads.

Make sure to power off the instrument when opening the Battery Compartment

Cover for battery replacement.

Advertising