KYORITSU 3128 - Manual (Page 70)

66
KEW3128
6. Measurement KEW3128
Items displayed at Graph Display Screen
Following items are displayed on the LCD with in stand-by mode and During
a measurement.
Displayed Items Details
Live Voltage Warning
Displayed while voltages are being output.
Flashing status shows discharge is in progress.
Graph
Bar graph indicating the measured insulation
resistances.
Axis for Current/
Resistance values
Axis is switched between current and resistance
values depending on each graph.
Measuring Time Elapsed time after a start of measurement
Pre-set Voltage Pre-set output voltage value
Output Voltage Voltage being output
Voltage Axis
(in SV Mode)
Voltage Axis is displayed only in the SV
Measurement Mode.
Pre-set Value Pre-set values for each measurement mode