Positive) red - (negative) black – KYORITSU 3128 User Manual
Page 77
Advertising
KEW3128
73
KEW3128
7. Battery Charging and Replacement
④
Pull out the Tray toward, and take the battery out.
⑤
Pull up the Battery Connectors upward as indicated by arrow mark in
the below left illustration, and remove them.
⑥
Remove the old battery and install a new one (rechargeable lead
storage battery PXL-12050: 12V 5Ah). Check the orientation of the
connectors (see above illustration on the right) and no deformation on
the metal terminals and install a battery in correct polarity. Then, insert
the Tray fully.
⑦
Install the Battery Compartment Cover so that the surfaces of the Cover
and the instrument become flat, and fix it with screws.
+ (positive)
red
- (negative)
black
Advertising