KYORITSU 3128 - Manual (Page 28)

24
KEW3128
6. Measurement KEW3128
⑤ The instrument enters into stand-by mode when settings are made.
⑥ Connect the Earth Cord (black) to the Earth Terminal of the
circuit under test.
⑦ Put the tip of the Line Probe (red) to the circuit under test. Then
press the Test Button. The buzzer sounds intermittently during a
measurement.
Press and turn the Test Button clockwise to lock the Button for making
measurements continuously.
The sound of buzzer when a Voltage Range is set to 12kV is special to
give warnings that high voltages more than 10kV is output.
L I N E