Metex SharkTX Multi-Parameter Transmitters - Manual (Page 54)

MULTI-PARAMETER TRANSMITTER USER’S MANUAL
Conductivity - Setup Menu - Conductivity Range 6.6
Conductivity - Setup Menu - Conductivity Range 6.6 Page 52
UP DOWN
DOWN
DOWN
UP
UP
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN UP
UP DOWN
UP DOWN
DOWN
DOWN
DOWN
UP DOWN
Conductivity Range will allow the user to select the
measuring range of the instrument.
The ranges can be selected from any of the following:
200 mS/cm - cell constant 50
20 mS/cm - cell constant 10
5000 uS/cm - cell constant 1
200 uS/cm - cell constant 0.1
20 uS/cm - cell constant 0.1
2 uS/cm - cell constant 0.01
19.99 M
Ω - cell constant 0.01
With "N" selected, pressing the key
will NOT store the selection, but simply
return to the COND RANGE Menu. This
function is useful if you wish to view the
current selection without making any
changes.
Not stored
RUN MODE
UP
NOTE
PRESS THE AND KEYS
TOGETHER TO GO IMMEDIATELY BACK TO
RUN MODE
DOWN
Then press the key to store the
selection and return to the COND
RANGE Menu.
Stored
Or press the key to highlight
the Y character.
Press the key to accept the
setting and move to the store function
Once the correct range is selected,
move to the store function to save the
selection
Press the key once
which will move the cursor back
to the RH side of the display.
Use the or keys to
scroll through the available ranges
Press the key once
which will move the cursor
over the last character of the
range.
STORE? Y N STORE? Y N
COND. RANGE
COND. RANGE
20.00mS/cm >
COND. RANGE
20.0 0 mS/cm >
200. 0 mS/cm >
19.9 9 Mo/cm >
COND. RANGE
COND. RANGE
1000uS 25.0C
CALIBRATION
SETUP
UTILITIES
20.0 0 uS/cm >
COND. RANGE
COND. RANGE
2.0 0 uS/cm >
200. 0 uS/cm >
COND. RANGE
COND. RANGE
500 0 uS/cm >
COND. RANGE COND. RANGE
5000uS/cm >
COND. RANGE