Metex SharkTX Multi-Parameter Transmitters - Manual (Page 58)

MULTI-PARAMETER TRANSMITTER USER’S MANUAL
Conductivity - Setup Menu - T. Comp Override 6.10
Conductivity - Setup Menu - T. Comp Override 6.10 Page 56
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
UP
DOWN
DOWN UP
DOWN
DOWN
UP
DOWN UP
DOWN
Not stored Stored
If you wish to save the setting, press the
key to highlight the Y character
Temperature Compensation Override is used to manually set the
actual probe or process temperature. This is useful if the probe
does not have a temperature sensor or if the process temperature
is constant. When the override is enabled, the controller will use
the selected temperature when performing temperature
compensation calculations.
UP
NOTE
PRESS THE AND KEYS
TOGETHER TO GO IMMEDIATELY BACK TO
RUN MODE
DOWN
With "N" selected, pressing the
key will NOT store the selection, but
simply return to the T. Comp Override
Menu. This function is useful if you wish
to view the current selection without
making any changes.
RUN MODE
Press the key to accept the
reading and move to the store function
Press the key once
which will move the cursor
back to the RH side of
temperature display.
Then press the key to store the
selection and return to the T. COMP
OVERRIDE Menu.
Press the key to accept the
change and move to the Temperature
Entry function
Press the key once
which will move the cursor
over the least significant digit
of the temperature display.
Use the and to
adjust the reading until it agrees
with the known temperature of the
probe or process
The user can now enter the actual
probe or process temperature
Use the or keys to
select either ON or OFF.
Press the key once
which will move the cursor
back to the RH side of the
Press the key once
which will move the cursor to
the ON or OFF text
STORE? Y N STORE? Y N
TEMP 35. 7 C >
TEMP 25. 4 C >
COMPENSATE O FF >
COMPENSATE O N >
T.COMP OVERRIDE
T.COMP OVERRIDE
COMPENSATE ON >
T.COMP OVERRIDE
T.COMP OVERRIDE
T.COMP OVERRIDE
T.COMP OVERRIDE
TEMP 25.4C >
TEMP 35.7C >
T.COMP OVERRIDE
T.COMP OVERRIDE
CALIBRATION
UTILITIES
SETUP
1000uS 25.0C
AUTO RETURN
TEMP SENSOR
T.COMP OVERRIDE
COMPENSATE OFF >
T.COMP OVERRIDE
TEMP UNIT
COND RANGE
T.COMP OVERRIDE