West Control Solutions N6600 - Manual (Page 95)

3.3.6 Heater Break Alarm Strategy
This defines the terms in which the heater break alarm level is expressed:
Selection/confirmation is as previously described.
NOTE: When this parameter is set to the Absolute Amps mode, the Heater
Nominal Current parameter (Set Up Mode - see Volume 1 Section 3) is not
available and Quick Transfer (see Volume 1 Subsection 2.13) is disabled.
3.3.7 Output 2 Usage
The displays for this item are of the form:
in which the upper display indicates the usage, which will be one of the following:
S075-3 3-8
PM-0075