West Control Solutions KS98-1 - Manual (Page 9)

I Operating instruction
I-1 Description
The instrument is a compact automation unit the function of which can be configured freely by means of function
blocks. Each unit contains a comprehensive function library for selection, configuration, parameter setting and connec -
tion of max. 450 function blocks by means of an engineering tool.
I.e. complex mathematical calculations, multi-channel control structures and sequence controllers can be realized in a
single unit.
Various operating pages are indicated via the front-panel LCD matrix display, e.g.
w Numeric input and output of analog and digital signals, values and parameters as well as
w full-graphics display of bargraphs, controllers, programmers and trends.
w Display colour red / green and direct / inverse display can be switched over dependent on event, or by operation
dependent on the engineering.
Dependent on version, the basic unit is equipped with analog and digital inputs, outputs and relays.
Additional inputs and outputs are available either with option C or “modular option C”, which contains four sockets for
various I/O modules.
Optionally, the unit may be equipped with 2 additional communication interfaces:
w Option B: serial TTL/RS422 interface or Profibus-DP
w Option CAN: CANopen-compliant interface port for the I/O extension with modular I/O system RM200
9499-040-82711 Description
I-9
1 2 3 4
KS 98-1 advanced
Fig. 1 Frontview