Alps Electric MD-1300 - Manual (Page 123)

121
Note
Iron-on transfer sheets, back print films, and overhead projector
transparencies cannot be used for undercoating.
Step 1
❿ ❿ ❿ ❿ ❿
Create Data for Full Color Printing
Use any application to create the image or document you want to
print in full color.
Note
White portions of data (R = G = B = 100%) are not undercoated
and therefore will be the color of the paper used.
Step 2
❿ ❿ ❿ ❿ ❿
Install the White Ink Cartridge
Install the white ink cartridge in any of the ink cartridge holders.
Step 3
❿ ❿ ❿ ❿ ❿
Load Paper in Your Printer
The method used for loading paper depends on the paper type.
Use manual feed mode for thick paper and greeting cards. For
plain paper, laser paper and High Grade Paper, you may also use
automatic feed mode to print a number of sheets at one time. For
details, see Chapter 1, "Loading Paper".
1. For manual feed mode, set the paper feed switch to posi-
tion "M"; for automatic feed mode, set it to "A".
Paper feed switch “A” Paper feed switch “M”
Undercoating with a White Ink Cartridge