Alps Electric MD-1300 - Manual (Page 60)

Chapter 2 - Various Printing Operations
58
Step 1
❿ ❿ ❿ ❿ ❿
Create Data for Printing on Photographic-Quality La-
bels
Use the application of your choice to create the text and graphics
you want, and lay them out within the printable area of a Photo-
graphic-Quality Label.
The following explanation will assume the use of Photographic-
Quality Labels (2 stickers). Follow the same general sequence
when you use Photographic-Quality Labels (20 stickers).
Photographic-Quality Labels templates have been prepared in the
Label folder of the ALPS Installation CD-ROM included in the pack-
age. When creating data using those templates, please see the
section “How to Use Photo Label Templates” in the “Read Me” file
on the ALPS Installation CD-ROM for instructions. You may use
them, or employ some other application to lay out the data ac-
cording to the print format shown below.
20 stickers 2 stickers
Step 2
❿ ❿ ❿ ❿ ❿
Install the Photographic-Quality Ink Cartridges
Install the Photographic-Quality ink cartridges into the ink car-
tridge holders. The ink cartridges may be installed in any order.
8.5mm (0.33")
19.8mm (0.78")
3.6mm (0.14")
5mm (0.2")
100mm (3.94")
22mm (0.87")
164mm (6.46")
17mm
(0.67")
75mm (2.95")
12.5mm (0.49")
19.8mm (0.78")
100mm (3.94")
164mm (6.46")
52mm (2.05")
20.4mm (0.8")