Loading paper in automatic feed mode – Alps Electric MD-1300 User Manual
Page 26
24
Chapter 1 - Major Functions and Operations
Loading Paper in Automatic Feed Mode
Use automatic feed mode to allow consecutive printing.
There are two methods for loading paper, depending on the media.
Letter / A4 size of High Grade Paper, plain paper,
laser paper, and transparencies
1.
Pull out the paper support.
2.
Switch the paper feed mode.
Place the paper feed switch in position “A”.
3.
Place the paper in the sheet feeder.
Note
•
Using creased or curled paper can cause the paper to misfeed.
•
Fan the paper once before placing it in the sheet feeder. The
printer may feed two sheets together if the sheets are slightly
stuck together.
•
Use only one type of paper at a time.
•
Pushing the paper feed guide too hard against the paper can
bend the paper. Adjust the position of the paper feed guide
so that it just touches the paper.