Alps Electric MD-1300 - Manual (Page 85)

83
Step 1
❿ ❿ ❿ ❿ ❿
Create an Image for Full Color + Spot Color Printing
1. Prepare the full color image and the spot color images
separately.
2. Create one file containing the full color image and a sec-
ond file containing the spot color image.
Note
•
In applications that allow multiple pages, the spot color im-
age may be prepared on page 1 and the full color image on
page 2.
•
For instructions on indicating spot colors on page contain-
ing the spot colors, please refer to the section titled “Multi
Spot Color Printing” earlier in this guide.
•
To make it easier to correctly position the full color and the
spot color images, prepare all the data in a single file and
then make two copies of the file. In one file delete the spot
color data and, in the other file, delete the full color data.
•
When you want to print full color + spot color without split-
ting the two sets of data, place the spot color data on top of
the full color data and set its color to white so that it does not
print. Positioning the spot color data above the full color
data and setting its color to white makes it relatively easy to
use the same image for both sets of data.
Spot color image
Output results
Full color image
Printing in Spot Color (Metallic and White Color printing) / Full Color + Spot Color Printing Using Overlay Mode