Alps Electric MD-1300 - Manual (Page 24)

22
Chapter 1 - Major Functions and Operations
Loading Paper
This section explains how to load paper into the printer.
Paper Types and Available Feeding Modes
See the table below for information on switching between automatic and manual
feeds, and on setting the paper feed switch ("A" or "M").
Media type Automatic feed mode Manual feed mode
Plain paper (for plain paper copiers) A M
Laser paper / High Grade Paper A M
Photo Realistic Paper (Letter / A4) x M
Photo Realistic Paper (4 " x 6 " / 100 x 148 mm) M*1 M
Photo Realistic Labels x M
Overhead Projector Transparency Film A M
Iron-on Transfer Sheets x M
Back Print Film x M
Other (thick paper, etc.) x M
Photographic-Quality Paper (Letter / A4) A*2 M
Photographic-Quality Paper (4 " x 6 " / 100 x 148 mm) A*2 M
Photographic-Quality Labels A*2 M
*1 For Photo Realistic Paper (4" x 6" / 100 x 148 mm), always set the switch to position “M”,
regardless of feed mode.
*2 To continuously print Photographic-Quality Paper or Labels, always use the guide sheet
(included in the supplies).
Caution
Do not print on thermal paper, paper exclusively for use in ink
jet printers, glossy paper (paper whose surface has been spe-
cially treated), and envelopes. Doing so may damage the printer.
Note
Loading too many sheets into the sheet feeder may cause paper
jams or misfeeding.
Be aware that when using automatic feed mode, the last sheet
to feed will occasionally feed incorrectly depending on the pa-
per type.