Agilent Technologies E8247C PSG CW - Manual (Page 52)

42 Chapter 2
Basic Operation
Configuring the RF Output
Figure 2-5 Delta Markers on 8757D
6. Press
Turn Off Markers
.
All active markers turn off. Refer to the Key Reference for information on other marker softkey
functions.
Adjusting Sweep Time
1. Press
Sweep/List
.
This opens a menu of sweep control softkeys and displays a status screen summarizing all the current
sweep settings.
2. Press
Configure Ramp/Step Sweep
.
Since ramp is the current sweep type, softkeys in this menu specifically control ramp sweep settings.
When step is the selected sweep type, the softkeys control step sweep settings. Notice that the
Freq Start
and
Freq Stop
softkeys appear in this menu in addition to the
Frequency
hardkey menu.