Athena Technologies 16C - Manual (Page 19)

15
NOTE: FOR A MORE DETAILED DESCRIPTION OF MENU
PARAMETERS, REFER TO THE GLOSSARY
WHICH BEGINS ON PAGE 64.
The first parameter that needs to be set is Input Type. The remaining
Input Menu parameters will change, depending upon whether a linear
input type or a temperature input type is selected. Other menu param-
eters related to the sensor range may also change. After selecting
your Input Type, refer to the corresponding section on page 16 for the
remainder of the Input Menu parameters.
Input Menu
Display Parameter Selection
Input Type Type J thermocouple
Type B thermocouple
Type C thermocouple
Type E thermocouple
Type K thermocouple
Type N thermocouple
Type NIC thermocouple
Type NNM thermocouple
Type R thermocouple
Type S thermocouple
Type T thermocouple
Platinel II thermocouple
100 ohm
platinum RTD
Input Menu