Athena Technologies 16C - Manual (Page 42)

38 39
IEC
Requirements
The maximum supply current is line voltage dependent:
230 mA for a 24 Vac/dc input fuse rating=700 mA
60 mA for an 85-250 Vac input fuse rating=100 mA
Output Specifications
Output Type Max current Voltage Leakage
B 5 A 250 Vac 1000 M ohms
T 1 A 250 Vpk 1 mA
S 20 mA 5 V NA
CLEANING INSTRUCTIONS
1. Remove power from the unit prior to any cleaning operation.
2. Use a cotton cloth to gently and sparingly apply isopropyl
alcohol only. Do not use cleaners or other solvents as they may
damage the unit.
3. Allow the unit to dry completely prior to reapplying power.
USE OF THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY
THE MANUFACTURER MAY IMPAIR PROTECTION PROVIDED
BY THE EQUIPMENT!