Athena Technologies 16C - Manual (Page 6)

2 3
Mounting
Dimensions
Figure 2. Case Dimensions
Prior to mounting the Series C in your panel, make sure that
the cutout opening is of the right size, 1.771” x 1.771” (45
mm x 45 mm), and deburred to enable a smooth fit. A mini-
mum of 4” (100 mm) of depth behind the panel is required.
Figure 3. Series C Mechanical Components
Insert the Series C through the front panel cutout and slide
the mounting collar back onto the unit from behind the
panel. Push the mounting collar up tight to the back of the
mounting panel.
2.100"
(53.3mm)
O1
O2
A1
A2
F1
F2
PV
SV
2.100"
(53.3mm)
4.654"
(118.21mm) 3.937"
(100 mm)
0.717"
(8.21 mm)
1.750"
(44.5 mm)
Bezel
Case Clip
Grips
Gasket Customer Panel
When properly
installed through
a NEMA enclosure,
the integrity of the
enclosure will be
maintained and will
remain “Watertight.”