Canon imagePROGRAF iPF605 - Manual (Page 129)

Handling rolls
Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
• Remove any loaded paper that will not be used.
• Rolls (→P.117)
• Sheets (→P.150)
• If the Platen is dirty, clean inside the Top Cover. (→P.495)
1.
Open the Roll Feed Unit Cover.
2.
Insert the edge of the roll paper into the Paper Feed Slot (a) and feed it manually until you
hear the paper feed tone.
Important
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect
the printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the
printing surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load paper straight so it is not fed askew.
The printer now starts advancing the paper.
Handling Paper 115