Canon imagePROGRAF iPF605 - Manual (Page 563)

Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead.
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.479)
2. Clean the Printhead if the nozzles are clogged.
(→P.480)
Highly transparent lm is loaded that cannot be used
for Printhead adjustment. We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.453)
Cannot adjust band.
Cause Corrective Action
The Printhead nozzles are clogged. Follow the steps below to check the nozzles.
1. Print a test pattern to check the nozzles.
(→P.479)
2. Clean the Printhead if the nozzles are clogged.
(→P.480)
Highly transparent lm is loaded that cannot be used
for feed amount adjustment. Adjust the feed amount manually.
(→P.461)
PHead needs cleaning.
Cause Corrective Action
The Printhead nozzles are clogged. Specify Printhead cleaning options.
(→P.480)
If the message is still displayed after Head Cleaning
B, contact the Canon dealer for assistance.
Problem with Printhead
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(→P.480)
Error Message 549