Canon imagePROGRAF iPF605 - Manual (Page 152)

Handling rolls
Feeding Paper from the Roll Feed Unit
The Paper Feed Slot used to feed roll paper is the same as the Paper Feed Slot used for the Top Paper Feed
Slot, so both methods of feeding paper cannot be used at the same time.
Thus, if a roll has been advanced when you wish to print from the Top Paper Feed Slot or Front Paper Feed
Slot, change the paper source.
1.
Select sheets as the paper source. (→P.109)
2. After Remove roll? is displayed, press the OK button.
The roll is rewound automatically.
Similarly, if a sheet is in the Top Paper Feed Slot or Front Paper Feed Slot when you wish to print on a
roll, you will need to remove the sheet from the slot and reinsert the roll paper (which has been rewound)
in the Paper Feed Slot.
1. Select the roll as the paper source. (→P.109)
2.
After Eject sheet? is displayed, press the OK button.
The sheet is ejected automatically.
138 Handling Paper