Canon imagePROGRAF iPF605 - Manual (Page 441)

Network Setting
Specifying Printer-Related Information
Follow the steps below to specify device information and security settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http://“printer IP address or name”/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4. Click Information in the Device Manager menu at left to display the Information page.
5.
To display the relevant settings page, click Edit in the upper-right corner of Device Information
or Security, depending on what information you want to specify.
6.
Refer to the table of settings for device information, security, and email notication as you
complete these settings.
Device Information Settings
Item Details Default Setting
Device Name Enter a device name.
(0-32 characters) blank
Location Enter the location where the device is installed.
(0-32 characters) blank
Administrator Enter the administrator’s name.
(0-32 characters) blank
Phone Enter the administrator’s contact information.
(0-32 characters) blank
Comments(E-mail) Enter any comments regarding the administrator.
(0-32 characters) blank
Security Settings
Item Details Default Setting
Old Password Enter the current device password.
(0-14 characters) blank
New Password Enter the new password.
(0-14 characters) blank
Conrm Enter the new password again to conrm it.
(0-14 characters) blank
Besides entering a password, you can specify other security-related information, such as IP
address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or
IPP and FTP authentication settings.
7.
Click OK to activate the settings.
Network Setting 427