Canon imagePROGRAF iPF605 - Manual (Page 567)

Other Messages
Other Messages
GARO Wxxxx (x represents a number)
Cause Corrective Action
Try printing again, using the correct printer driver. There is a problem with the print job.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
ERROR Exxx-xxxx (x represents a letter or number)
In the following situations, turn off the printer and wait at least three seconds before restoring power.
If the message is still displayed, write down the error code and message, turn off the printer, and contact your
Canon dealer for assistance.
• “ERROR” is displayed, followed by the error code and Call for service..
Hardware error. xxxxxxxx-xxxx (x represents a letter or
number)
In the following situations, turn off the printer and wait at least three seconds before restoring power. However,
keep the printer off and remove the roll if the last portion of roll paper was used during a print job and paper
could not be advanced because the trailing edge is taped to the roll. If tape and the Belt Stopper have not
been removed from inside the Top Cover, turn off the printer, open the Top Cover, and remove the tape
and Belt Stopper before restoring power.
If the message is still displayed, write down the error code and message, turn off the printer, and contact your
Canon dealer for assistance.
• The error message is displayed with the following instructions: Turn off printer, wait, then turn on
again..
Error Message 553